Lumin Smart Panel - Installation
Generation 6 and Earlier Two LED indicator lights on the right side of the LSP. Generation 7 Three LED indicator lights on the right side of the ...
Fri, 12 Jan, 2024 at 5:33 PM
Installers can become Lumin Certified Installers by completing the certified installer training at Lumin School, accessible at luminsmart.learnworlds.com. A...
Mon, 15 Apr, 2024 at 11:52 AM
CT Configuration Overview A Lumin Smart Panel (LSP) ships standard with one pair of 200-amp CTs. Most Lumin installations use these as the Main CTs and cla...
Mon, 11 Mar, 2024 at 6:07 PM
Smart Power Mode/Off-Grid Mode and Grid Detection Circuit Overview Enabling Smart Power Mode/Off-Grid Mode Adding and Removing Protection in Smart Power ...
Tue, 23 Jan, 2024 at 6:07 PM
Grid Detection Circuit Installation Overview Grid Detection Circuit Installation Example Grid Detection Circuit Installation Overview Lumin's Gr...
Mon, 11 Mar, 2024 at 6:21 PM
CT leads can be extended using a variety of field wiring methods. The ideal solution, (especially for a longer wire run) is 18 AWG twisted-pair wiring, eith...
Thu, 11 Jan, 2024 at 6:29 PM
Lumin Smart Panels can control six poles of up to 60 amps and six poles of up to 30 amps. Occasionally, a load greater than 60 amps needs to be controlle...
Thu, 21 Dec, 2023 at 6:48 PM
This support article is a stub. It will soon be expanded to better document best practices for CT and grid voltage detection when more than one Lumin Smart ...
Thu, 21 Dec, 2023 at 6:53 PM
Lumin-controlled loads must be associated with the correct phase or leg of power for proper energy and power readings to display in the Lumin Smart app. Wat...
Fri, 22 Dec, 2023 at 5:22 PM
The Lumin Smart Panel (LSP) receives operational power from a 240-volt circuit that must be landed on a two-pole circuit breaker. Watch the linked video to ...
Mon, 11 Mar, 2024 at 6:53 PM